Single Girder Overhead Crane
5t Single Girder Overhead Crane
A 5 t single girder overhead crane for general workshop lifting, maintenance bays and light fabrication. A single main girder with an underslung hoist gives a light crane and an economical runway, which is normally the best answer at this capacity.
The standard series supplies spans from 7.5 m to 22.5 m and lift heights from 6 m to 18 m. At 5 t the duty class is usually set by the number of lifts per shift rather than the load, so a process that runs continuously may need a heavier class than the weight suggests.
- Confirm at order: span, lift height to the hook, duty class, control type and power supply.
- Also agree: hook approach and the clear height above the rail.
- Capacity
- 5 t
- Span
- 16.5 m
- Lift Height
- 9 m
- Work Class
- FEM 2m / M4
- Power
- 10.8 kW
- Power Supply
- 380V/50Hz/3ph
- Supply Range
- span 7.5-22.5 m; lift 6-18 m
Specifications
| Capacity | 5 t |
|---|---|
| Span | 16.5 m |
| Lift Height | 9 m |
| Work Class | FEM 2m / M4 |
| Speeds | hoist 8/0.8 m/min; cross 20/5 m/min; long 40/10 m/min |
| Power | 10.8 kW |
| Hook | Single hook |
| Model | OS-5 |
| Standard | FEM/ISO |
| Duty Cycle | 1500 h/year |
| Power Supply | 380V/50Hz/3ph |
| Supply Range | span 7.5-22.5 m; lift 6-18 m |
Verified datasheet — final configuration confirmed with your order.
Applications
All applicationsFAQ
All FAQs›How close to the end of the bay can the hook travel?
On a single girder crane the hook approach is limited by the hoist envelope under the girder and by the end carriage. Tell us the approach you need at each end and we will confirm it against the hoist arrangement, rather than assuming the standard figure applies.
›What span limit should I expect for a single girder crane?
Single girder cranes are normally the economical answer up to about 20 m. Beyond that the girder depth needed for stiffness reduces the advantage, and a double girder crane usually gives a better result for the same building.
Related Products
Request a Quote
Not sure which configuration fits your plant?
Request a Quote