Krandura

Box Girder Gantry Crane

5t Box Girder Gantry Crane

A 5 t box girder gantry crane with A-frame legs, travelling on a ground rail for outdoor yards, precast plants, stockyards and truck loading. It needs no runway beams, so it suits storage areas and yards where no building can carry the crane.

The standard series supplies spans from 7.5 m to 22.5 m and lift heights from 4.5 m to 12 m. Because the load goes into the track, the rail gauge, wheel loads and the bearing capacity of the yard surface are part of the specification, and the out-of-service wind case matters if the crane stays outside.

  • Confirm at order: span and rail gauge, lift height, wheel loads and the existing track or foundation condition.
  • Also agree: wind exposure for an outdoor installation, duty class, travel speeds, control position and the power feed along the track.
Capacity
5 t
Span
16.5 m
Lift Height
6 m
Work Class
FEM 2m / M4
Power
11 kW
Power Supply
380V/50Hz/3ph
Supply Range
span 7.5-22.5 m; lift 4.5-12 m
AI illustration of a 5 ton box girder gantry crane with portal legs, ground rail wheels and wire rope hoist
Main viewAI-rendered illustration. Final equipment configuration confirmed with your order.

Specifications

Capacity5 t
Span16.5 m
Lift Height6 m
Work ClassFEM 2m / M4
Speedshoist 8/0.8 m/min; cross 20/5 m/min; long 40/10 m/min
Power11 kW
HookSingle hook
ModelGF-5
StandardFEM/ISO
Duty Cycle1500 h/year
Power Supply380V/50Hz/3ph
Supply Rangespan 7.5-22.5 m; lift 4.5-12 m

Verified datasheet — final configuration confirmed with your order.

Applications

All applications
›Do I need a concrete foundation for the gantry rail?

The rail has to transfer the wheel loads into the ground, so either an existing track with sufficient bearing capacity or a new foundation is needed. Send the wheel loads and the ground or existing track condition, and the foundation becomes part of the quotation rather than a site surprise.

›How is an outdoor gantry crane rated for wind?

The crane is designed to an agreed in-service and out-of-service wind condition for your site, and the anchoring or rail clamp arrangement follows from it. Wind exposure is a design input, so tell us the location and whether the crane stays outside permanently.

Related Products

Request a Quote

Tell us your requirements — capacity, span and lift height are the three numbers we need first. Inquiring about: 5t Box Girder Gantry Crane

Not sure which configuration fits your plant?

Request a Quote